The Street Triple R has been getting the track day treatment with protection, top shelf suspension, and race tires. You can read about the track makeover HERE.
But, since I’ll be riding the Striple both on the track and the street, I’m also adding some street goodies to help make it a bit more street-able. It’s a great street bike to begin with, but a few select accessories make the Street Triple R a nice road companion.
R&G Tail Tidy Fender Eliminator
The R&G Tail Tidy allows my bike to be ready for both track or street. The fender eliminator save a lot of weight and keeps the turn signals tucked in in case of a fall.
Click the link below to view the Twisted Throttle product page for the Tail Tidy.
Seattime
The Triple R came with a Sargent seat as well as the stock seat. The Sargent is very firm, like I know Corbins to be. The shape is much flatter than the stock two-toned seat, which unlike the stocker, keeps my gentlemen from getting “tanked” when braking. The Sargent isn’t perfect. The forward edges are a bit sharp and it kinda keeps me on a single position. The Sargent makes most sense on the highway where I am angled forward into the wind, which scoots my butt back into the “pocket”of the seat’s shape.
On the track, I found the Sargent to be too restrictive when hanging off the bike all the way.
This is where the stock seat is superior with a crowned shape that allows for easy side-to-side movements. It’s really easy to change the seats, so I’ll use both for their respective purposes.
Lord of the Tankring
I’ve used the SW-MOTECH/Bags-Connection Quick-lock tankbags for a while now. The bags are very nice, but the real advantage of these bags is the tankring mounting system. The bag clicks on and off the tank so easily that I will never go back to straps or magnet tankbags.
The heart of the system is the tankring that mounts tot he gas filler ring around the gas cap and the mating ring screwed on the bottom of the tankbag. With this tankring, I can switch my Bags-Connection Sport tankbag on both of my bikes; the Sprint RS and the Striple within only a few seconds.
Lord of the Flyscreen
Naked bikes are, well, naked. As as such, expose the rider to a wall of wind. This isn’t bad for most street riding situation, but once it gets chilly and you hit the highway, that wind blast becomes a bit much.
I knew the Triumph OEM flyscreen would not give a heck of a lot of protection, and it doesn’t. But, I hope that it will give me a place to tuck when I’m flying down the racetrack at over 100 mph. We shall see when I head to Barber at the end of November.
Update: I added the Sport version of the MRA X-creen from my street bike (Sprint RS) just before leaving for Barberrrrr…it worked great. From twistedthrottle.com
Phone Mount
I’m installed a RAM ball to the Triple’s handlebar mount so I can have my phone within sight distance for those times I use my iPhone’s GPS function. The phone itself will be attached using the spring-loaded RAM X-Grip device. It’s proven to be a secure mount during off road adventures with the guys and gals at Twisted Throttle. I mounted the RAM ball on the forward right handlebar mount so that the phone would not block the more pertinent information on the LCD screen (speedo, time, etc.) As it sits, it is tucked close to the master cylinder and only blocks the tach past 14,000 rpm. Not a problem on the street.
The RAM GoPro ball makes mounting the camera a breeze. No need for sticking mounts on the bodywork. Just be sure to tether the camera housing to the handlebars in case things get loose.
I can listen to the GPS navigation through my Interphone Bluetooth Intercom. I also listen to music when I feel like it. This is the system I use when I do one-on-one instruction on the track and on the street when I travel with my family.
Update: The Striple has not seen much street time since track day season has begun. It’s slowly but surely turning into a track day-only bike. Take a look at how it’s become outfitted for the track.
Product Gallery. Buy from here and support RITZ
Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
- Click the PayPal “Pay Now” button.
- Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
Thank You!
Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Nice article Ken! It got me thinking about optimized accessories. Would like to see a picture of the stock seat and also how various mounts for GoPro cameras are positioned. Any heads up helmet displays using telemetry realtime data?
Good idea, Gary. I’ll post a photo of the stock seat tomorrow. THe GoPro camera will be able to be mounted on the RAM mount that I should be getting in a couple days. I’ll show how that will look.
Heads up displays are still a little ways away for consumers, but they are on their way.
Looking good, Ken! I am particularly interested in the phone mount – I have been thinking of ways to use my phone as a GPS on my Futura. Do you have a picture of that set up? How are you charging the phone, if you are? Are you using any kind of blue tooth to hear the turn by turn directions?
Photos added (not great ones). and info about the Bluetooth device I use.
Really appreciated the article, Ken, as someone who’s set his heart on getting this great bike next spring. My only real reservation is the “nakedness” for the highway driving! Love to add some real protection but I’ve been reliably informed that trying to add the Daytona fairing is a non starter. Any future ideas you have to add a bit of decent wind protection would be very much appreciated by us all out here, I’m sure.
Regards, Adrian
Adrian, the MRA X-creen I clamped on works great. see the photo I just added. It stayed put at over 100 mph (on the racetrack, of course). http://www.twistedthrottle.com/mra-x-creen-add-on-variable-windscreen-spoiler-blade-bolt-on-10601
Ken,
It looks like the MRA X-creen is clamped directly to the fly screen, is that correct. If so, I’m ordering one for my 2013 Street Triple R.
Thanks for all your good info
Dave
Yep. It clamps right onto the flyscreen. It’s just the right width.