In our last episode, I told the tale of a young lad who needed to show off to his friends and just about pulverized himself against a line of trees. If you recall, that lad was me when I was 16 years old. Well, there are more examples of the trials and tribulations that I experienced as I went through the arduous task of learning how to survive at motorcycling. Today, I’ll tell you of the time I tried to be a good guy and was rewarded with a tough guy with a bad attitude. My 1971 Bonnie. I owned it until 1989.
No Good Deed Goes Unpunished.
Unlike other anecdotes I will be sharing in this series, this story does not involve any failure on my part, except to assume I would not be threatened for trying to be helpful. It was 1981 and I was riding home at night on my 1971 Triumph Bonneville on Commonwealth Ave. in front of Boston University. I was minding my own business when I noticed a car in my rear view mirror without its headlights on. At the next stoplight, I kindly signaled to the driver that his lights weren’t on. Well, the passenger must have been looking for a reason to pick a fight, or perhaps my well-meaning comment triggered a childhood trauma. Either way, the next thing I know, the passenger door swings open and an angry guy brandishing a baseball bat comes toward me. Not wanting to see how well my full-faced Shoei helmet would withstand the impact of a Louisville slugger, I promptly got myself outta there. This meant running through the red light and accelerating as fast as the 650 twin would go. I figured that getting out of there was all I needed to do to shake my would-be assailant, until I looked in my mirror to see that he too had run through the red light and was in hot pursuit. As it turned out, I was able to shuck and jive through enough side streets to encourage the angry young men to give up the chase. I made it home in one piece. Although my perception of the kindness of man was left tattered on Comm Ave. that night. Wow, there really are people among us who would choose violence over reason. Alcohol likely fueled their hair trigger response to my attempt at being helpful. Which just goes to show the kind of people we share the roads with…drunk and angry. Here is a photo of a bagpiper. It has nothing to do with this article, but it does show the weird things you come across when on a motorcycle. Jeannine and Caroline look on.
I Feel So Vulnerable
The bat-wielding jerk made my life flash in front of my eyes because I was vulnerable. Sitting exposed on a motorcycle in the middle of Boston at night made me vulnerable to whatever these crazies had to deliver. The good news is that a motorcycle is pretty quick and maneuverable (even a 1971 Triumph), so I was able to evade my pursuers. What would I do now? I would not risk the consequences of engagement and instead distance myself from anyone driving without their headlights on at night. This indicates a possible drunk driver who has the potential to hurt me. Syonara, sucker. Have any of you had a similar situation happen to you?
Stay Tuned for Epoisode 3 when I learn that a too-fast entry speed can be very dangerous. Learn from my experiences by ordering the book.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
It’s hard enough to get accustomed to a new-to-you bike, but throw in a new-to-you racetrack, and things can get interesting. It’s kinda like patting your head while rubbing your tummy in a circular manner (I’m pretty good at that, BTW). Normally, I get up to speed fairly quickly when I ride a new track, evaluating each corner for its character: radius, camber, and whether it is an “entry” turn or an “exit” turn. But, it took me longer than normal to sort out the Barber track, mostly because the track consists of blind corners and a layout that is somewhat complex. This means that it took a few sessions to not feel lost. I would be asking myself, “Wait, is this that tight turn or is it that turn that opens up?”. Add to that the need to acclimate to a new-to-me motorcycle and the first day at Barber had me not exactly feeling Stig-like. The second day was much better. Which way do I go? Notice the fogging face shield. Copyright Raul Jerez / Highside Photo
Learning the Barber Motorsports Rollercoaster
I could tell you all the super-secrets I use to learn new tricks, but I would be repeating myself, because I already wrote a lengthy article on tips for learning new tracks on the Tony’s Track Days website. Read it HERE. Share any other tips you have in the comments below. Even with my book of tricks in mind, I had a harder than normal time figuring out Barber. Now, to be fair to myself and to put things into perspective (lest you thought for one minute that I wasn’t awesome from the start), I was going respectably fast in the Advanced group after the first session. However, my standards for pacing with the fast guys made me rather discouraged. I know many of you slowpokes are used to being passed by half of whatever group you ride in, but I am not (just kidding). But, even after the third session, I was feeling a bit too much like I should be in the Intermediate group. This would not do, so I consulted with Tony and my faster peers from New England and discovered that I was slowing too much for a few corners and not getting on the gas nearly early or hard enough. The last two sessions were better, as I started identifying the problem corners and applying some of the reference points Tony and the others were using. Mother Nature’s Tire Warmers Sunday morning was 25 degrees F, so we substituted the frozen on-track festivities for a walk around and some bench racing around the tire warmers. Tony and I didn’t bring tire warmers, so we opted for Mother Nature’s warmers, which worked surprisingly well (at least on one side of the tires). After lunch, the temps got up to a whopping 35 degrees, so we pulled on our leathers and hit the track. Nippy fingers and a fogging face shield told me to take it slow, but after a few laps, it became apparent that the track itself had some grip. Since it was 70 degrees only a few days before we arrived, the ground wasn’t nearly as cold as the air and the asphalt was well over 50 degrees…not great but acceptable. Let the fun begin. The rest of Sunday was a blast. I started getting up to speed hooking up with Keith, Woody, and Rich. Tony, Adam and Aaron were too fast for me. See the videos HERE. But, wait! There is more to this story, so read on.
The ZX6R owenstrackdayphotos.com
A New Bike
If you’ve been reading the RITZ blog at all you probably know that I sold my most-awesome ZX6R for a Triumph Street Triple R. I really didn’t want to sell the ZX, but a medical issue required me to make the switch from a crouched racer posture to an upright naked posture (oh, grow up). The differences between the ZX6 and the Street Triple’s spanned only a few areas: handling, gearing, power characteristics, body position, throttle response, drive timing, front tire grip, footpeg feel, shifting ease, wind noise, and color (I wonder how the Striple would look painted Kawi Green). With all these things to adjust to, it took me most of the first day to get a good session in. The new bike. Copyright Raul Jerez / Highside Photo Where’s the Power? In a nutshell, I wished the 675 had more power. I know, I know power just masks poor riding. But, it also is very useful when trying to pace with the big boys. The Triple doesn’t drive nearly as hard as the ZX636, so I needed to learn to ride the bike more like a small displacement bike, like a SV. To get the bike out of corners and reach acceptable speed on the straights, I needed to go from cracking the throttle to Wide Open Throttle (WOT) immediately to get the drive I wanted. I found myself using full throttle a lot. The 1050 throttle tube helped make full throttle a bit quicker compared to the stock tube, but a MotinPro unit may find its way onto the Triple’s handlebar end fairly soon. Why is my Bike Twerking? OK, so power was down, but that is something I found to be rather fun to manage. Full throttle is never boring. I even think I could have kept with Tony if the bike had better manners in the handling department. Don’t get me wrong, for most riders, the Street Triple R’s fully adjustable fork and shock would be awesome, especially for street duty. The bike never scared me, but I was pushing the bike fairly hard and found the bike wanting to wiggle like Miley Cyrus when cresting the turn 3 hill at full honk. I never felt as if I could drag a knee over that hill with the way the Striple was Twerking beneath me. Perhaps there was some more adjustments that could have tamed the beast, but the temperatures were so low and the oil so thick that any adjustments would probably not net any real benefit, so I left the adjusters at the Loudon settings and dealt with it. Peter at Computrack Boston will be receiving my forks and order for a new shock by the end of the year so I can have more range of adjustment to suit my style.
In a future post, I will talk about my experience as a track day customer, as opposed to an administrator/instructor. I made note of several areas that helped me better relate to track day customers I work with. Stay Tuned.
I can imagine that a lot of fellow riders who know me may have a hard time imagining me screwing up. This is because unless you’ve actually seen me screw up, you’re left with a somewhat unreal impression of me as a competent, knowledgeable motorcycle rider who does no wrong. After all, I can talk about advanced riding concepts with a tone of confidence and I ride well enough to back up the impression that I know what I’m talking about. Well, at the risk of sounding arrogant (am I too late?), I do think I have earned a place at the table with some accomplished motorcycle riding pros. I’m not the fastest guy or the most eloquent, but I have a knack for communicating practical knowledge, both in print and in person. But, the fact is that a lot of my knowledge has come from some epic screw ups. Let’s step into the way-back machine and re-experience a near-death experience when I was 16 years old. Don’t let this happen to you.
Tire Terror
It was 1976 and I was riding my 1973 Yamaha TX650 behind some friends in their car. Being a teen whose awesomeness was never fully recognized, I took the opportunity to show my four-wheeled friends what coolness looks like, so I accelerated past them to an indicated 100mph. Just before I reached the end of the straight, the Yamaha started wobbling and weaving so violently that I couldn’t make the right-hand turn that was inconveniently placed at the end the straightaway. What happened next is a bit of a blur, but I somehow stayed upright in a drainage ditch, threaded between a row of telephone poles and trees, and landing upright on someone’s driveway with my heart pounding out from under my Sears windbreaker. My friends drove up and stopped with mouths wide open. With a “I meant to do that” swagger, I rode home at under the speed limit. Later, I asked my brother what could have caused the problem. After a little investigation we determined that my bald no-name rear tire was likely to blame. The Lesson: When you ride on a bald rear tire, keep it under 100 mph. Naw, just kidding. How about, always have new tires so you can go 100 mph anytime you want. Wait, that’s not quite right either. I know! Replace your tires before they reach the tread wear indicators so they don’t cause you to have a near death experience. We’ll go with that.
Stay Tuned for Part 2 for more fun when I reveal how being a good Samaritan exposed me to another near death experience. Learn from my experiences by ordering the book.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
What kind of attitude about safety does this suggest? It’s probably not what you think. You wouldn’t be alone if you thought that the most important part of riding a motorcycle is to learn the physical skills, such as braking, cornering, slow speed maneuvers, and perhaps swerving. While those are very important skills to master, it is the mental skills that are the most critical skills to develop when it comes to reducing injuries and death. And the most important mental skill of all is attitude.
Wait, what?
Yes, in my opinion attitude is the most critical thing to get right; before cornering, or braking, or strategies for managing traffic. Attitude colors the relationship a rider has with motorcycling. A positive and committed attitude toward safety needs to be established from the start and maintained throughout a rider’s two-wheeled career. That’s right, I said career, how’s that for a committed attitude?
How badly do you want to survive? Perhaps I’m being melodramatic, but it’s a serious question. When it comes to participating in a sport where people die, you owe it to your loved ones and yourself to ask that question. If the answer is “I really, really want to survive”, then do something about it. It’s important to have excellent physical skills, such as cornering, braking and the ability to perform evasive maneuvers. However, superior mental skills prevent the vast majority of close calls and crashes. Learn to play the mental game and you’ll be a winner. Refuse to learn the tricks of motorcycle control and survival and you’ll lose. But, it all starts with a committed attitude. Without an attitude that prioritizes risk management, then it’s unlikely that really proficient mental and physical skills will ever develop. It takes a commitment to be really good at anything, including motorcycling. Without a certain level of commitment, you can count on mediocrity. Can motorcycle riders afford to be mediocre?
This is number 3 in a series on adapting to a new motorcycle, whether that means borrowing a friend’s bike, swapping bikes on a ride, or adapting to a new bike. Please share your experiences in the comments section. If you’d like, read Part 1 and Part 2 to see what other challenges we often face when adapting to a new motorcycle. Too much throttle, too quickly. photo by Tim Richer
You Can’t Handle all that Power
Testing the brakes is probably the first thing you should do when swinging a leg over a new bike. Many people think that power delivery is the most important thing to calibrate to, because acceleration is a more obvious and intimidating force…fewer people seem intimidated by brakes. Even though more people seem to get into trouble with unfamiliar brakes, plenty of people fail to consider what they’re in for when twisting the throttle.
Throttle Transitions
One of the most common issues I have when riding different bikes is how smooth or abrupt the power delivery is when transitioning from off-to-on throttle. This can be a serious control issue if I am at full lean. When I crack the throttle, I am looking for a smooth delivery of power. But, some bikes are not mapped (FI bikes) or jetted (carbureted bikes) correctly for a gradual, controlled transition. What I get instead is a lurch that upsets the tires and sends the bike off line. One of the worst bikes I’ve ridden was an early model Honda RC51. It took all my tricks to control that bike’s fueling (see below). I had my mind set on buying a new Yamaha FZ-09, but after hearing about the abrupt throttle delivery, I decided on the Street Triple, which is know for decent throttle control and response. Although it could be better, IMO. Manufacturers try to find the balance between meeting emissions requirements and acceptable performance, which means that the fueling is often too lean for good throttle control. This is where Power Commanders and other aftermarket products come in. With a little time and a laptop, you can adjust the fueling the way it should be for performance, at the expense of emissions…something the manufacturers aren’t allowed to do. Getting on the throttle photo: www.owenstrackdayphotos.com
Throttle Response
Throttle response is another factor that varies from bike to bike. Throttle response is how quickly the engine responds to rider throttle inputs. A snappy response is good for sportbike riders that want immediate results to get the bike launched as hard as possible. This is especially desirable when riding on the racetrack. Many racers install quick-turn throttle housings to get to full throttle with as little wrist movement as possible. Street riders usually want a less aggressive throttle response so that inadvertent throttle movements don’t result in unwanted acceleration. But, slow throttle response can make a bike feel sluggish, unexciting and lazy.
Managing All That Power
To get a feel for throttle response and power delivery, find a straight section of road and roll on the throttle gradually. Grabbing a handful of throttle grip could land you on your ass if the rear tire spins or if you loop it in a mondo wheelie. In either case, you now own a bike that some idiot crashed (you). If you are testing a bike with multiple power delivery modes, you may want to set it to the “rain” mode to soften power delivery. After some time, you can try the full power modes. Apparently, the FZ-09 has acceptable throttle transitions using the least aggressive power mode, but what fun is that? Keep your right wrist in a comfortable down position for better control.
Throttle Tricks to Try
Here are some simple things to do to help manage throttle control:
Ratchet Throttle- Instead of rolling the throttle like a rheostat, move your wrist as though you are rotating through a series of “clicks”. This measures your throttle position better to help resist introducing too much throttle at one time.
Keep your wrist down- A comfortable wrist-down position “locks” your throttle in position and helps control throttle movements.
Relax- Arm tension transfers to the handlebars and handgrips.
Anchor your thumb- Stick your thumb out a bit to make contact with the handlebar control pod to lock your hand in place. This is especially useful when riding at slow speeds.
The journalist’s brake hand (and mind) were calibrated to a large adventure bike, not the top-spec, radial mount, four piston anchors that the sportbike was styling. All it took was a driver pulling out in front of the journalist to cause the over-braking to happen. A skid ensued, followed immediately by the sound of plastic and aluminum grinding itself mercifully into the pavement. Luckily, the rider came out of it in better shape than the bike. I ride a lot of different motorcycles on the street and the racetrack, one of the first things I do is test the power and sensitivity of the brakes. I squeeze the front brake a few times with varying intensity. I don’t ignore the rear brake as I press the pedal to see if it bites too abruptly and is prone to locking (many are), or is very weak, requiring significant pressure to get any useful brake force at all. The Street Triple is a hybrid in that the rear brake seems to be weak initially, but then grabs. This is something I discovered the first time I descended my gravel and dirt driveway. Oh, and yes, I do use the rear brake. That’s a topic for another post.
Better Braking
Two fingers or Four? I say two on most sportbikes. Perfect practice makes perfect habits. And habits are what you’ll fall back on in an emergency. Besides familiarizing yourself with the brake’s feel, you should also use good brake technique (always). Determine whether you should use four fingers on the front brake or if two fingers might give you better control. No matter how many fingers you use, be sure to always SQUEEZE the front brake lever progressively. Grabbing a handful of brake lever will lead to nothing good. It will likely skid the front tire and you will be pile-driven into an unforgiving bit of very hard tarmac or dirt. In most cases, this happens because you didn’t give enough time for the load to transfer onto the front tire contact patch. With little load on the front tire, the powerful front brakes can easily overwhelm the available traction. Instead of a skidding front tire, it is possible to find yourself staring at your front wheel as you get flung forward. Or you may end up doing a stoppie. However, more times than not, the front tire skids before either of these occurrences happen. To prevent a skid, always squeeze and then squeeze harder if necessary. Part 1 – New Bike Part 3 – Power Delivery
Both speed was and Lack of Visibility caused this crash. I know what you’re saying. “You’re telling me that there are only 2 things I need to do to survive riding on the street?” You betcha. So, here is the caveat to this sensational statement; there are more like 1 Gazillion things you need to know to be the safest rider you can be. But, I don’t have that much time and you’d be bored by the time I got to number 15,000. So, I’m going with my top 2. And with no further ado, here they are. The envelope. please.
Jeannine being Speed Smart Being “Speed Smart” doesn’t necessarily mean sticking to the posted speed limit. I’m no angel when it comes to ignoring ridiculous speed limit signs, especially when the payoff is worth the risk of a ticket ( a great section of twisty tarmac with little traffic). No, I’m talking about being smart about when and where you wick it up. You can avoid a majority of close calls if you just keep the throttle under control. Here’s how.
Ride at “Expected” Speeds
It’s important to ride close to the marked speed limit when riding through town centers, and whenever you are near other drivers, especially when riding through intersections. Riding at a speed that is greater than is expected will likely result in the driver pulling in front of you, thinking he or she has time to go. This is largely because a motorcycle has a narrow frontal area, which makes it more difficult for drivers to judge your approach speed and distance.
Ride Slow in a Slow Environment
One of the most common reasons motorcycle riders crash is because they ride faster than the environment will safely allow. Riding at the speed limit makes total sense when there is a lot of traffic, but what about when the road opens up? It may be tempting to go WFO, but no matter how much you wish the road were a racetrack, it is not! You can get away with excessive speed for a while, but some day it will bite you. I can almost guarantee it. Really fast sport riding belongs on a racetrack, dummy. Even if you are a racetrack hero, you must understand that the unpredictable nature of the street does not allow you to exercise your full cornering prowess. With hazards such as road surface hazards, unexpected changes in radius and camber, or other vehicles crossing into your lane you can easily exceed the limits of the environment even though you may be nowhere near your personal limits.
Cornering Correctly: Slow in, Fast out
The vast majority of single-vehicle crashes are the result of riders failing to negotiate a curve and a common reason for this is a rider entering a corner at a speed that is too fast for the conditions or for the rider’s ability. The best strategy is to slow to a conservative speed and then gradually accelerate when you are sure it is safe to do so. Keep in mind that you can always get on the gas, but you can’t go back in time to enter the turn at a slower speed.
Respect Time and Space
Still not convinced just how significant speed is to keeping you safe? Then consider the timing and circumstances of a typical 30 mph crash. At that speed you are traveling at 44 feet per second (1 mph = 1.47 ft/sec). Getting a motorcycle stopped at 30 mph takes just over two seconds and requires about 35 feet of space. But, braking distances include more than just the time and space to physically stop your motorcycle. It also includes “thinking time” and “reaction time”. At 30 mph you can count on using about .7 seconds or 31 feet to realize that there is a problem. It then takes you another .3 seconds or 13 feet to react by rolling off the throttle and reaching for the brakes. That means you traveled 44 feet before even touching the brakes. Finally, it takes you about 2.2 seconds or 35 feet (with a typical deceleration rate achieved by the average rider) to bring the motorcycle to a halt. Add this “braking time” to the “thinking time” and “reaction time” and you’ll need a total of 3.2 seconds and 79 feet with which to stop.
Top Motorcycle Survival Tip #2: Be Visible
“SMIDSY”= “Sorry Mate, I Didn’t See Ya” The most common phrase uttered by drivers who are involved in a motorcycle crash is; “I didn’t see him”. It’s easy to blame the driver for being inattentive. After all, texting, NAV systems, and other distractions are vying for drivers’ attention…you know who you are. While this is a reality on today’s roads, too many riders fail to recognize their role in being visible, choosing to wear dark colors and riding in a way that hides them from other drivers. Even being seen is not as reliable as we would like. Most motorcyclists have stories of drivers pulling out in front of them even though the driver was looking directly at them. What would cause a driver to proceed if the rider was in plain sight? It’s common for a driver’s brain to dismiss the appearance of a relatively insignificant (small) vehicle (motorcycle) on the roadway and pull out without ever “seeing” the motorbike.
Use Effective Lane Positioning
In traffic, it’s important to constantly evaluate your ability to see and for others to see you. Poor lane position is a factor that can prevent you from being seen and seeing hazards. This includes not having sufficient following distance. Ample following distance provides a wider angle of view to see past the vehicle and allow other drivers to see you. Proper lane positioning also includes your location within the width of your lane. Motorcycle riders have the option of riding in the left, center or right portion of the lane. This gives you the ability to place your bike where you can see farther ahead and where other drivers can see you. Exactly what is the best lane position? In many situations, riding in the left/center of your lane makes the most sense. This position allows you to see past the vehicle ahead and gives you a good angle of view of the oncoming lane. Certain situations require you to alter this position, such as an oncoming vehicle threatening to cross the centerline. Lane position changes continually depending on the road surface, other drivers, and your angle of view.
Loud Pipes
Basic science says that sound is not a reliable source of information. Sure, loud pipes increase the likelihood that drivers will know you are in the vicinity, but don’t be fooled into thinking that sound will help a driver locate where you are in traffic. This is why installing loud pipes is not a great strategy for increasing safety. A much more reliable strategy is to be more visible. A driver who sees you and is able to accurately judge your speed and distance is much less likely to pull out in front of you. The importance of using strategies for being seen cannot be overemphasized. Unfortunately, too many riders don’t seem to understand this.
There are lots of other tips that are important for surviving on a motorcycle like don’t ride drunk or stoned, be attentive, etc. But. if you can follow these two strategies I outlined, you are well on your way to making it home at the end of a great day of riding.
OK. Now it’s your turn.
I know you’ve been chompin’ at the bit to tell the world what you think is the most important tip for surviving. So, let’s hear your comments.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
Be a Better Rider: Sign Up for Personal Training with Ken
